Brass patina: how it develops and how to care for your H64

Brass patina: how it develops and how to care for your H64

Brass changes when you use it. At first, the surface is bright and golden. Over time, it becomes softer in colour and a little darker. Some areas change faster than others, especially where you touch the metal often. That's part of what happens with uncoated brass.

What is patina?

Brass is an alloy of copper and zinc. We use CuZn37 for the H64, with roughly 63% copper and 37% zinc. Its uncoated surface reacts with air, moisture and substances transferred by your hands. Gradually, it develops darker marks and tones. This is known as patina.

The change initially happens at the surface. If you prefer a brighter finish, suitable cleaning and polishing can remove much of it. The result will depend on the finish and how far the surface has changed.

Why does it develop unevenly?

The areas you handle when assembling the H64 or taking it out of its case are often the first to show marks. Areas you rarely touch may stay bright for longer. Humidity, storage and frequency of use all make a difference.

It's one reason why two brass H64s won't look exactly alike after they've been used for a while.

Leave it or polish it?

It's entirely up to you. You can let the patina develop, polish selected areas or brighten the whole surface. The contrast between polished and darker sections can bring out the object's geometry in different ways.

Cleaning off wax and dust

  1. Let the candle, wax and metal cool completely.
  2. Gently lift off larger pieces of wax by hand. Avoid hard tools.
  3. Remove smaller marks with a soft cloth, slightly dampened with lukewarm water if needed.
  4. Dry both pieces carefully, including the edges and slots.

Avoid scouring pads, harsh cleaning products and prolonged soaking. They may affect the finish.

Bringing back some shine

  1. Clean and dry the H64 first.
  2. Apply a small amount of mild polish suitable for uncoated brass to a soft, lint-free cloth.
  3. Test a discreet area first, then polish gently with light pressure.
  4. Remove all residue, especially from the connecting slots.
  5. Finish with a clean, dry cloth.

Polishing affects the surface and can leave fine marks, so use as little as necessary and only when you want to. Avoid strongly abrasive or aggressive products.

What about home remedies?

Lemon juice, vinegar and even ketchup are often suggested for cleaning brass. Their acids can remove tarnish, but they can also leave marks or change the finish unevenly. For the H64, we'd choose a suitable brass-care product and test it carefully first.

Keeping brass brighter for longer

Store the H64 dry, clean and fully cooled, ideally in its case. Freshly polished brass will show new fingerprints quite quickly. That's normal for an uncoated surface.

And stainless steel?

Stainless steel 1.4301 doesn't develop the same dark patina under normal conditions, although signs of use can still appear. A soft, dry or slightly damp cloth is usually all it needs.

Good to know

Is patina a defect? The usual patina of uncoated brass is a characteristic of the material. Your statutory rights concerning defective goods are unaffected.

Can I remove it? Suitable polishing can brighten the metal again, though the result varies with wear and surface condition.

How often should I polish? Not at all if you like the patina. Polishing isn't necessary to use the H64.

Why isn't the brass lacquered? A coating would slow down the changes at first, but it could also become damaged over time. We chose an uncoated finish that can be maintained and refreshed.

Read more about both options under Materials, or explore the H64.